Do I Need to Use Chlorine in My Lay‑Z‑Spa?( No, See Why)

Do I Need to Use Chlorine in My Lay‑Z‑Spa?

Do I Need to Use Chlorine in My Lay‑Z‑Spa?

Chlorine is an essential disinfectant in the pool industry. You can use it to kill algae, bacteria, and viruses that may have entered the water.

However, Chlorine is a gas that makes it difficult to measure its precise level in swimming pools.

The Lay‑Z‑Spa Chlorine Meter Kit helps you monitor your pool’s chlorine levels by providing accurate readings right at your fingertips.

The kit includes  steps for testing of your chlorine levels, including

  • A test vial sample cup
  • Ten disposable test vials with caps
  • One pipette dropper tube, two pipette dropper tubes (for calibrating), Three-color stoppers (to ensure accuracy of results), instructions for use booklet, and more.

Do I Have To Use Chlorine In My Lay‑Z‑Spa?

No! There is no need to use Chlorine in your Lay‑Z‑Spa.

The Lay‑Z‑Spa includes a durable, state-of-the-art water filtration system that removes impurities from the spa water.

This curbs bacteria and algae growth that can cause skin irritation or infections.

Additionally, Chlorine can damage hair and skin over time by causing dryness, redness, itching, peeling & scaling.

Chlorine also has an unpleasant odor which can linger on clothes even after washing them more than once.

There are many ways to enjoy your Lay‑Z Spa without using Chlorine.

To maintain crystal-clear water in your Lay‑Z Spa, we recommend that you:

  1. Empty and rinse out your spa with fresh water at least twice a month; and
  2. Add 2-3 liters of treated tap water or Lay‑Z Spa Filter Cartridge Refills every week.

Can You Use A Lazy Spa Without Chlorine?

Yes, You can use a lazy spa without Chlorine, but the water will not be as clean as it would be using Chlorine.

The average time for a chlorine tablet to dissolve in swimming pool water is about 30 minutes.

To have clean water in your DIY Spas, you should replace tablets or sticks every 2-3 hours.

And this means that daily, you need to spend at least one hour testing and adding chemicals.

This is an essential point because if the level of disinfectants falls below safe levels, there can be problems with algae or bacteria growths.

Many products claim that they clean the spa automatically via some form of electrolysis, but these claims are usually false.

Adding salt is one of the popular method, which does help keep the water clean and clear for a while (although not forever).

This is because salt helps maintain chlorine levels and prevents algae growth (especially in outdoor pools).

Salt also lowers the pH level, which can make it difficult for bacteria to grow.

The other option is to use bromine instead of chlorine tablets.

Bromine tablets will last much longer than chlorine tablets, which means that you do not have to change them as often or rotate them at all.

However, bromine is more expensive than Chlorine, so this method may become quite costly over time.

In addition, note that if your Spa is not maintained correctly, it’s possible that parasites can come from the soil and become lodged in your Spa.

And these parasites will stay in the tub unless you treat the water with an appropriate chemical solution.

How Do I Maintain My Lay‑Z‑Spa Water Daily?

You can maintain your Lay-z-Spa water daily by using the Water Balancer.

This product removes Chlorine, sulfur, and scale build-up present in your Lay-z-Spa water.

Take your Lay-z-Spa out of winter storage and remove any debris built up around the tub during any off-season storage periods.

If you are unsure if there is an accumulation of material ruling against removal, contact your authorized dealer for assistance.

Remove the basket filter from the inside floor of your Spa, then clean away all leaves or unwanted surface matter that may have accumulated over winter.

It would help if you rinsed the basket thoroughly with fresh water before being reinserted into the spa floor. Ensure to also check hoses for damage and tighten as necessary.

Use the Water Balancer to balance your water and remove any contaminants built up over winter.

Add one capful of balancer per 100L (26 US gallons) of water, using a clean watering can or other vessels with a pour spout.

Leave for 12 hours before draining out through the filter system. You should always drain until all product traces get removed from the tub before filling again.

Otherwise, freshwater will dilute it and reduce action on residue build-up in your hot tub.

During this draining process, keep an eye on the temperature gauges to ensure they do not drop below 4°C/40°F during cold snap conditions.

After draining, add fresh water to your spa and check that the temperature gauge has gotten restored to operational levels.

This will indicate that the heater is functioning correctly again. Finally, plugin and turn on (plugging in any bubbles/jets before turning on the central heater may damage these).

Once you have reached the desired temperature, switch off jets/bubbles if required. Turn back on jets/bubbles once the temperature reaches the desired optimum.

Please note: Over-flushing may reduce heating performance for 24 – 48 hours afterward.

Experts recommends limiting this process to 1 – 2 times per year only during the closing down period.

Ensure that you  remove all traces of the Water Balancer from the tub before refilling.

Failure to do so will result in diluted performance and may cause damage to your water heater.

Do I Need To Use Chemicals On My Lay‑Z‑Spa And Why?

Yes, because it’s the only way to get the proper amount of Chlorine into the water.

The Lay-Z‑Spa has a water sanitation system that pumps fresh, clean tap water through our rapid inflatable purification system.

Water entering the spa is straight from your garden hose and is not treated with chemicals before use.

This means it will need to become chlorinated with either liquid or tablet chlorine before using it safely for hydrotherapy purposes.

The Lay-Z Spa must always boast complete infiltration when using this function so that all surfaces can come into contact with the water.

For safety reasons, do not allow anyone onto an inflated Spa

What Are the Recommended Chemicals for Lay‑Z‑Spa Hot Tubs?

The Recommended Chemicals for Lay‑Z‑Spa Hot Tubs include bromine tablets, cyanuric acid, algaecide, chlorine tablets, pH Up/Down, and saltwater for Lay-Z-Spas.

The water chemistry of a hot tub can affect the overall efficiency of the filtration system of the Lay‑Z‑Spa.

When you correctly balance these chemicals with each other in conjunction with regular cleaning of your Lay‑Z-Spa hot tub’s filter, you can help keep it running more effectively.

Chlorine Bleach: Like the chlorine tablets used in hot tubs, this can be diluted and added to water to help control bacteria levels. It’s typically available at any grocery store.

Cyanuric Acid (Stabilizer): This chemical helps prevent the sun’s UV rays from breaking down free Chlorine in your Lay‑Z‑Spa.

When using cyanuric acid, you must either use more Chlorine or add an algaecide since it will not kill algae directly.

If you don’t follow this advice, algae may grow. Cyanuric acid is typically available at stores where pool chemicals boast sales.

You can also purchase “UV protection” additives that contain these ingredients blended as a single chemical.

Bromine Tablets: Small tablets containing bromine are typically added to water as a safer alternative to chlorine bleach since they do not produce harmful by-products if the pH is too high or low.

They may also contain algaecide. It would help if you never used Bromine tablets with a metal halide saltwater system or other types of sanitizing systems.

On the contrary, you must always use chlorine tablets in conjunction with a saltwater system – otherwise, it will cause damage to your equipment and dissolve away within days.

PH Up/Down: This is typically available at pool product stores. You can vinegar or baking soda or diluted into the water as an inexpensive substitute for this.

Saltwater System: You buy this as a complete system that you can plug into your Lay‑Z‑Spa.

It works by converting regular table salt into Chlorine through electrolysis.

The bromine tablets get added to this system, but they will also take care of the other chemicals in addition to keeping your water clean.

How often do I put Chlorine in my Lay-Z-Spa?

2-3 days . Chlorine is there for sanitizing the water so that no bacteria or algae can grow in it. If your spa is used regularly throughout the day.

Then chlorine levels will drop below 0.5ppm after about four days of use which means you need to add some more chlorine to raise it back up to between 1-3ppm again.

If you are only using your Lay Z Spa occasionally over a few days, i.e., at weekends or overnight, leave the Chlorine altogether as this won’t be necessary.

When you use the spa during these periods, let it run with fresh untreated tap water for 20 minutes.

Before refilling and adding any chemicals that may have gotten emptied by the jet action (chlorine tablets and algaecide).

Letting that water stand for a few days allows any potential contaminants to dissipate.

No chemicals or treatment will be required when next used (ideal if you’ve not got round to using your Lay Z Spa for a while!)

You should make sure that someone turns on your Lay-Z-Spa each day, though, as leaving it turned off for more than 48 hours will mean the chlorine tablet dispenser needs ‘topping up.’

Can I Use 3-Inch Chlorine Tablets In The Hot Tub?

Yes, you can use 3-inch chlorine tablets in a hot tub.

Experts recommend a chemical sanitizer for your hot tub.

Chlorine is the best choice in most cases because it comes in tablet form and is relatively inexpensive compared to other sanitizers.

While 4 inch or 5-inch chlorine tablets work well, they don’t dissolve as rapidly as 3-inch tablets, making them less effective with a large amount of water movement.

The most popular types of chlorine tables are trichlor pucks and dichlor pucks.

Trichlor pucks dissolve slowly while dichlor pucks dissolve quickly, but both dissolve more evenly than other brands on the market.

Before you add any Chlorine to your hot tub, be sure that you have already set up your chemical feeder.

A properly working chlorine feeder is essential to the safety and health of you and your family.

Not all chemical feeders get created equally, so be sure to read our guide on choosing a proper one.

Once you’ve chosen a chemical type and brand, follow the instructions on how much to use in relation to the volume of water in your hot tub.

As a general rule of thumb, most manufacturers recommend 1-4 pucks per 1000 gallons.

For best results, pre-dissolve 3-inch chlorine tablets in a bucket or other container before adding them directly into the tub with the pump running.

It’s always important to keep an eye on levels with any sanitizer, so it’s best to test your water daily.

Chlorine tablets are also susceptible to high temperatures, direct sunlight, and pH levels.

You may need extra chlorine tablets if you have certain types of water or high amounts of bathers.

To prolong the life of your 3-inch chlorine tablets, make sure you store them in a cool place like a refrigerator.

It would help if you replaced your 3-inch chlorine tablet every 2-3 months, depending on how often you use your tub.

If the chemical level starts to dissipate more rapidly than expected, this could indicate algae growth or an unknown contaminant.

Replace any toxic chemical immediately with fresh Chlorine according to the instructions above.

Do I Need A Floating Chlorine Dispenser For My Lay-Z-Spa?

Yes, having a chlorine dispenser with your inflatable spa is highly recommended.

What purpose does the chlorine dispenser serve?

Chlorine, in its compressed form, is used to sanitize the water of the spa.

While you can use several chemicals to clean an inflatable hot tub or pool.

Chlorine tablets are by far the most common way since they’re inexpensive and straightforward for anyone to use.

Using other types of chemicals can be dangerous if you don’t know what you’re doing, as some tend to create fumes or leave behind residue.

Which could cause damage to your unit. Chlorine, on the other hand, evaporates quickly after being added.

So it won’t harm your air bubbler system by leaving behind residue or creating harmful fumes.

Conclusion : Do I Need to Use Chlorine in My Lay‑Z‑Spa?

choosing what chemicals you need for your Lay-Z-Spa  needs several considerations. We can help with that!

Our expert team recommends using Chlorine daily to keep the water clean and smelling fresh but not too strong.

It would help if you also used an algaecide to kill any algae in the spa, so it doesn’t build up over time and create issues like cloudy or green water.


Hi! I' am Tom. I was a manager in one of the biggest stores for over 10 Years, am also an SEO by night. I don't like to call myself a blogger; they are very analytical, do email marketing, and know all SEO stuff. I faced many questions from customers about different products, and there was hardly any help on the internet. After learning all the things about these products as a manager the hard way, I decided to start a blog and help other people.

Recent Posts